Products  / 

Preparing hose for assembly

 
 
 
 
Hold the tool in the left hand so that the cutter bail is on the bottom and the pulling dog lever is on top.
Slide the strap tail through the slot

on the right side of the tool.

 
 
 
 
Press down on pulling-dog lever and rotate handle to begin tightening.

Tighten strap to desired tension. Simultaneously relieve some tension

while pushing the tool away as far as possible.

 
 
 
 
 

Pull the cutter bail to cut the strap tail. Tap the buckle ears down to

hold the cut strap tail in place..